Slate - Double Color - Tiles

  • GREEN WITCH
    Green Witch - Double Color, with green/red wine hues - Natural
  • GREEN WITCH
    Green Witch - Double Color, with green/red wine hues - Honed

  • GREEN WITCH
    Green Witch - Double Color, with green/red wine hues - Brushed

Sizes
Standard sizes (Tiles) From 150x150mm up to 600x900mm

Thickness
Client-specified

Standard Sizes Available
Sizes Thickness
Millimeters(mm) Millimeters(mm)
150x150 Ranging from:
8 to 30
200x200
150x300
200x300
300x300
300x400
400x400
250x500
300x600
450x450 Ranging from:
10 to 30
500x500
400x600
600x600
600x800 Ranging from:
15 to 30
600x900

Double color slate (GREEN WITCH) is supplied in natural split face and back or in calibrated back. The above thickness ranges refer to natural split face. Calibrated slate is supplied, as specified by the client, in uniform thickness ranging from 10mm up to 30mm.

Double Color Slate is Best Used For
Bathroom dividers Reception table tops
Benches Roofing tiles
Beveled strips Shelves
Billiards table tops Sink tops
Dividers / Partitions Skirting board / Base
Door steps Stairs (steps, risers, platforms)
Flashing Table columns
Flooring tiles Table tops
Garage entrance Tumbled mosaic
Honed mosaic Tumbled pavers
Kitchen tops Vanity tops
Landscaping Wall capping
Mosaic (set on fiberglass screen) Wall cladding
Passageways Window sill

Finishes
Beveled Honed
Brushed Natural
Bull nose Padded
Calibrated / Gauged Sandblasted
Chamfered Sawn edge
Chipped borders Snapped edge
Grooved Tumbled
Cut to size

Recommendations
Application of a good quality sealer on both surfaces and on the sides of the stone.

Combinations With Other Kinds and Colors of Slate
Exquisite artistic patterns can be made by combining Double Color Slate with other kinds and colors of slate such as grey, black, purple, and multicolor, in even-sized or odd-sized pieces.

Care, Upkeep and Maintenance
After installation, thorough cleaning must be carried out to remove excess grout, cement, stains, dust, soil and other kinds of dirt.
All excess grout, cement or paste must removed and cleaned from joints.
For cleaning, only clean water and neutral detergents and other kinds of cleaning materials.
Cleaning must be carried out immediately after installation, before grout, cement and other kinds of setting materials are dry.
Acids, whether pure or diluted, should never be used.
Only grout, cement, sealants, impregnators and cleaning materials from reliable manufacturers should be used.
The selected sealant, whether water-based or solvent-based, must be able to enhance the color and texture of the stone and make it impervious to oil, grease, fat, dirty water, and stains.
Floor wax or polishing wax should never be used on slate since it alters the color of the stone and makes it more prone to the accumulation of dust and dirt.

Packing
Slate tiles are packed in cardboard boxes and placed in wooden crates.
If the Client prefers, slate tiles can be packed only in wooden crates, without cardboard boxes.



Quarries

  • FELIXLANDIA I
    Felixlândia I quarry
  • FELIXLANDIA II
    Felixlândia II quarry